Pool INSITU ozone systems



Ozomax INSITU Ozone Pool treatment systems consist of two (2) components:

insitu ozone generator

INSITU Ozone generator: Produces ozone and mixed oxidants from the pool water itself.

insitu ozone generator power supply

INSITU Power Supply: Provides DC power to the INSITU ozone generator.

The internal computerized controller (PLC controller) allows

  • the user to select the power level desired
  • the constant monitoring and control of the power required to maintain the desired level of dissolved ozone
  • the automatic initiation of the INSITU ozone generator cleaning cycle to ensure that the internal electrodes are clean and working optimally
  • How does ozone pool treatment work?

    Ozomax's patented INSITU ozone generators produce ozone and several mixed oxidants such as atomic oxygen, hydrogen peroxide and hydroxyl radicals from the pool water itself. These oxidants react with the cell membranes of bacteria and viruses, oxidize them and convert them to carbon dioxide and water. Similarly, other pool water contaminants such as urine, sweat and saliva are eliminated.

    What is an INSITU Ozone Generator?

    Ozomax's INSITU ozone generators produce ozone not from air or gaseous oxygen but directly from water using a patented electro-catalytic dissociation process. The resulting nascent oxygen in the presence of precious metal catalysts produces a mixture of powerful oxidants including oxygen radicals, ozone, hydrogen peroxide and hydroxyl radicals. These work together to oxidize and eliminate organic and inorganic pollutants and are especially effective at destroying micro-organisms.

    Since ozone is produced directly from the water itself Ozomax INSITU ozone generators

  • are unaffected by ambient humidity and temperature
  • have no mass transfer losses - all of the ozone produced is dissolved
  • do not require any accessories such as air driers or ozone injectors thereby making them easier to install
  • require no maintenance as computerised power supply automatically initiates the cleaning cycle at a pre-determined frequency
  • What model ozone generator do I need?

    The size of ozone generator required is determined by the volume of your pool.

    See sizing chart below.

    Contact us by message HERE for a quotation.

    Pool Volume Recommended Model Electrical Input Nominal Dimensions
    Gallons Cubic Meters Volts Amps W / D / H (inches) W / D / H (cm)
    0 - 7500 0 - 30 Ozo-Insitu 6D/24L 24 10 16' x 6' x 32' 41 x 15 x 81
    7500 - 12500 30 - 50 Ozo-Insitu 24D/24L 24 10 16' x 6' x 32' 41 x 15 x 81
    12500 - 18750 50 - 75 Ozo-Insitu 36D/24L 24 10 16' x 6' x 32' 41 x 15 x 81
    18750 - 25000 75 - 100 Ozo-Insitu 36D/24L 24 20 16' x 6' x 32' 41 x 15 x 81

    How is this equipment installed?

    Why do we need to use sodium chloride (common salt, NaCl) ?

    Since Ozomax INSITU ozone generators produce ozone through an electrolytic process, one must ensure that the pool water is sufficiently conductive. To achieve this goal, salt (such as sodium chloride and/or sodium bromide) is added to the pool.

    The Ozomax INSITU ozone generator is not a salt chlorine generator. Salt chlorine generators produce chlorine whereas Ozomax INSITU Ozone Generators produce ozone and mixed oxidants.

    How much sodium chloride (NaCl) is needed?

    Sodium chloride is added to the pool at a concentration of 2 grams/L only at the beginning of the season to increase the water conductivity. A few months later, some make-up salt (say about 0.2 g/L) might have to be added in order to compensate for losses due to backwashing, splashing, rain etc.

    ATTENTION

    Government of Canada does not recognize the fact that ozone destroys all bacteria, viruses, etc. and could be used as a sole disinfectant in swimming pools, cooling towers and similar water treatment applications. Therefore any claims on this website about ozone disinfecting properties cannot be used or be accepted in any such applications in Canada.

    Use of ozone as a sole disinfectant for bottling water and food disinfection purposes is allowed in Canada and is approved by Canadian Health Agencies.

    OZOMAX inc.

    600 Robitaille
    Shefford, Quebec, J2M 1X2 Canada
    Telephone : 1 450 378-6825
    Fax : 1 450 777-0264
    engineering@ozomax.com